Build Gallery
2025 Chevy Silverado 1500 Chase Light Bar, Chase Pods & Whips
Built by Luis I. · @ls_nach0
Silverado with a 30" amber/white chase bar behind the grille, chase pods on ditch mounts and a pair of 6 ft whips, all on a wireless switch panel.
Get this exact setup
Everything on this build. Uncheck anything you don’t need, set quantities, and add it all in one go.
Complete the install (optional)
About this build
Luis I.'s 2025 Chevy Silverado 1500 LT is built around amber and white. A 30" Chase Light Bar sits behind the grille, running amber/white with strobe, and a pair of Dual Purpose Chase Pods with built-in strobe matches it. Together they give the Silverado work light, show light and warning flash from the same setup.
Out back, 6 ft High-Intensity RGB+W LED whips add color and height. Everything runs through the Wireless Switch Panel, which controls up to 6 accessories with no holes drilled in the dash, plus a Dual Harness that leaves room for more. It is a complete, clean lighting package for a half-ton Silverado. Want this Silverado 1500 chase light setup? Every part on Luis's build is in the parts list above.
Chevy Silverado 1500 LT lighting FAQ
What size light bar fits behind a Silverado 1500 grille?
This 2025 Silverado 1500 runs a 30" Chase Light Bar behind the grille. Size depends on the mount, so call 1-833-325-3250 to match a bar to your truck.
What are Dual Purpose Chase Pods?
They are amber/white LED pods with a built-in strobe, sold as a pair.
How many lights can the Wireless Switch Panel control?
The Wireless Switch Panel runs up to 6 accessories, with no holes drilled in the dash.
How it’s installed
- Mount the 30" Chase Light Bar behind the grille and aim it level before tightening.
- Mount the Dual Purpose Chase Pods as a pair; vehicle ditch light brackets (sold separately) put pods on the A-pillars.
- Mount the LED whips at the rear; a Buffer Spring (1 per whip) helps them take hits and snap-backs.
- Wire everything into the Wireless Switch Panel, which runs up to 6 accessories with no holes in the dash.
- Keep all wiring clear of the radiator, fans and exhaust, and secure it with zip ties.
