Build Gallery
2019 Chevy Colorado ZR2 Pure White Rock Lights
Built by Alexa L. · @blackfeatheradventure
Colorado ZR2 running a 4-piece Pure White rock light kit with extensions and a dual wiring harness.
Get this exact setup
Everything on this build. Uncheck anything you don’t need, set quantities, and add it all in one go.
Complete the install (optional)
About this build
Alexa L.'s 2019 Chevy Colorado ZR2 runs a 4-piece Pure White Rock Lights kit, one light in each wheel well. On a ZR2, that puts clean white light right where it counts: on the tires, the suspension and the ground you are about to drive over. It is a simple, functional setup for a midsize off-road truck.
Rock Light Extensions take care of the longer run to the rear wheels, and a Dual Harness gives two leads so Alexa can add more lighting to the Colorado later without rewiring. The lights are IP69 waterproof, so trail water and mud are not a problem. Starting with four is the easy way into rock lights on a ZR2. Want this Colorado ZR2 setup? Every part on Alexa's build is in the parts list above.
Chevy Colorado ZR2 lighting FAQ
How many rock lights does a Chevy Colorado need?
4 to 8 rock lights cover the wheel wells on most trucks. This ZR2 runs 4, one per wheel well.
Do I need rock light extensions?
Rock light extensions are for longer runs, like reaching the rear wheel wells. This Colorado ZR2 uses them.
Can I add more lights later?
Yes. A Dual harness gives two leads so you can add lights later, while a Single harness has no expansion.
How it’s installed
- Mount one rock light in each wheel well, aimed at the tire and the ground.
- Use the Rock Light Extensions for the longer run to the rear wheel wells.
- Route the harness along the frame with zip ties, clear of suspension travel, steering and exhaust heat.
- Wire through the Dual Harness, which gives two leads so you can add lights later.
