My Cart

Close
NewBuild gallery ApplySponsorship program Call 1 (833) 325-3250 · Mon–Fri 10–6 PST

← Back to the Build Gallery

2020 Jeep Wrangler Unlimited 15" LED Light Bar - FCKLightBars customer build

Build Gallery

2020 Jeep Wrangler Unlimited 15" LED Light Bar

Built by Barry L.

15 inch 4D-Optic flood bar in the front bumper of a Wrangler Unlimited.

Get this exact setup

Everything on this build. Uncheck anything you don’t need, set quantities, and add it all in one go.

4D-Optic Series LED Light Bar – Dual Row OSRAM (10"–55")
$ 179.99

Complete the install (optional)

Dual Harness
Dual HarnessTwo leads · run more lights now or later
$ 49.99
Wireless Switch Panel for Trucks – 6-Gang Auxiliary Switch Panel System
$ 399.99
Your setup$0
Want this setup for your vehicle? Talk to a real person · 1-833-325-3250

About this build

Barry L. kept his 2020 Jeep Wrangler Unlimited clean with one well-placed light: a 15-inch 4D-Optic Series light bar in the front bumper. The 4D-Optic Series is a dual row bar built with OSRAM LEDs, and Barry went with the flood pattern to spread light wide in front of the Jeep on the trail.

A compact bar in the bumper keeps the Wrangler's lines tidy and puts the light low, right where you need it for close-in trail work. The 4D-Optic Series comes in sizes from 10 to 55 inches, so the same bar family scales up if you want a bigger bumper or roof setup later. If you are shopping for a Jeep Wrangler bumper light bar, Barry's build shows how far a small bar goes. Every part is in the parts list above.

Jeep Wrangler Unlimited lighting FAQ

What size light bar fits a Jeep Wrangler?

Light bar size depends on where you mount it: bumper, behind the grille or on the roof. Call FCKLightBars at 1-833-325-3250 to match the right size to your mount.

Is the 4D-Optic Series a single or dual row light bar?

The 4D-Optic Series is a dual row light bar with OSRAM LEDs, available from 10 to 55 inches.

Where can you mount a light bar on a Jeep Wrangler?

Common mount locations are the bumper, behind the grille and the roof. This Wrangler runs its bar in the front bumper.

Do FCKLightBars lights come with a warranty?

Yes. Everything FCKLightBars sells carries a lifetime warranty.

How it’s installed

  • The light bar mounts in the front bumper on this build; bumper, behind the grille and roof are the common mount locations.
  • Bar size depends on the mount, so call 1-833-325-3250 to match the size to your bumper.
  • Use a Single harness for one light on one switch, or a Dual harness if you plan to add lights later.
  • A Wireless Switch Panel runs up to 6 accessories with no holes drilled in the dash.

Shop for your Jeep

Want this setup on your Jeep?Talk to a real person who installs this stuff. We’ll match the exact parts to your vehicle.
Call 1-833-325-3250

More builds like this

Running FCKLightBars? Get your build featured.Feature your build